ti6al4v的問題,我們搜遍了碩博士論文和台灣出版的書籍,推薦孫玉福,嚴亮(主編)寫的 新編有色金屬材料手冊(第2版) 可以從中找到所需的評價。
另外網站ChemPolish Ti6Al4V™ - RBP Chemical Technology也說明:ChemPolish Ti6Al4V is formulated to deoxidize and chemically polish titanium grade 5 and other high Ti alloys. Depending on an incoming surface condition ...
逢甲大學 材料科學與工程學系 梁辰睿所指導 黃冠諭的 應用自開發之程序控制系統於電漿電解氧化製程以探討氧化膜性能提升機制之研究 (2021),提出ti6al4v關鍵因素是什麼,來自於多階段程序控制系統、微弧氧化技術(電漿電解氧化技術)、Mn: TiO2光觸媒、表面改質、製程優化。
而第二篇論文國立臺灣科技大學 材料科學與工程系 施劭儒所指導 吳亭葦的 以冷凍乾燥法製備鈦酸鋇 /ꞵ 三鈣磷酸鹽 /膠原蛋白複合支架與性質鑑定 (2021),提出因為有 齒槽骨保存術、複合支架、膠原蛋白、鈦酸鋇、β-磷酸三鈣的重點而找出了 ti6al4v的解答。
最後網站TI-6AL-4V鈦合金到底有多耐腐蝕? - 壹讀則補充:Ti6Al4V 強於其他商業純鈦,但仍保持相同的硬度和熱性能(不包括導熱性)。 Ti6Al4V廣泛應用於航空航天、醫療、船舶、化學加工、刀片、唱片、生物醫學植入物 ...
新編有色金屬材料手冊(第2版)
![](/images/books_new/CN1/132/28/CN11328262.webp)
為了解決ti6al4v 的問題,作者孫玉福,嚴亮(主編) 這樣論述:
本手冊是一本根據現行相關國家標准和行業標准編寫而成的有色金屬材料工具書,其主要內容包括有色金屬材料基礎資料、鋁及鋁合金、鎂及鎂合金、銅及銅合金、鋅及鋅合金、鈦及鈦合金、鎳及鎳合金、鉛錫銻及其合金、稀土金屬及其合金、稀有金屬及其合金、貴金屬及其合金、有色金屬復合材料共12章,並將常用金屬材料力學性能符號新舊對照、中外常用有色金屬材料牌號對照作為附錄提供給讀者。本手冊內容全面,數據齊全,查找便捷,實用性強。 前言第1章 有色金屬材料相關知識11.1有色金屬材料相關術語11.1.1常用有色金屬材料物理性能術語11.1.2常用有色金屬材料力學性能術語11.1.3常用有色金屬材料組織
術語31.1.4常用有色金屬材料鑄造性能及工藝術語41.1.5常用有色金屬材料鍛壓性能及工藝術語51.1.6常用有色金屬材料焊接性能及工藝術語61.1.7常用有色金屬材料熱處理性能及工藝術語71.2有色金屬材料的分類和分組81.2.1有色金屬材料的分類81.2.2有色金屬材料的分組101.3 有色金屬材料牌號表示方法111.3.1鋁及鋁合金牌號(代號)表示方法111.3.2鎂及鎂合金牌號(代號)表示方法131.3.3銅及銅合金牌號表示方法151.3.4鋅及鋅合金牌號表示方法181.3.5鈦及鈦合金牌號表示方法191.3.6鎳及鎳合金牌號表示方法201.3.7稀土牌號表示方法201.3.8貴金屬
及其合金牌號表示方法221.4 合金元素在有色金屬材料中的作用231.5有色金屬材料的熱處理271.5.1有色金屬材料常用的熱處理方法271.5.2鑄造鋁合金的熱處理281.5.3變形鋁合金的熱處理291.5.4銅合金的熱處理311.6常用有色金屬材料的性能311.6.1常用有色純金屬的性能311.6.2常用有色金屬材料的主要特性331.6.3常用有色金屬材料的物理性能341.6.4常用有色金屬材料的力學性能371.6.5常用有色金屬材料的可加工性381.6.6常用有色金屬材料的耐蝕性381.7有色金屬材料的狀態代號與鑄造方法代號391.8有色金屬材料的塗色標記391.9有色金屬材料的理論重量
計算公式401.10常用有色金屬材料的儲運管理41第2章 鋁及鋁合金422.1變形鋁及鋁合金的狀態代號(GB/T 164575—2008)422.2變形鋁及鋁合金的牌號與化學成分(GB/T 3190—2008)462.3鋁合金板材與帶材672.3.1一般工業用鋁及鋁合金板材與帶材的一般要求(GB/T 3880.1—2012)672.3.2一般工業用鋁及鋁合金板材與帶材的力學性能(GB/T 3880.2—2012)792.3.3 一般工業用鋁及鋁合金板材與帶材的尺寸偏差(GB/T 3880.3—2012)1152.3.4鋁及鋁合金壓型板(GB/T 6891—2006)1222.3.5鋁及鋁合金花
紋板(GB/T 3618—2006)1242.3.6鋁及鋁合金波紋板(GB/T 4438—2006)1292.3.7鋁合金預拉伸板(GB/T 29503—2013)1302.3.8鋁及鋁合金壓花板與帶(YS/T 490—2005)1362.3.9鋁及鋁合金彩色塗層板與帶(YS/T 431—2000)1372.3.10鋁及鋁合金鑄軋帶(YS/T 90—2008)1452.3.11鋁及鋁合金深沖用板與帶(YS/T 688—2009)1462.3.12鋁及鋁合金圓片(YS/T 770—2011)1502.3.13建築裝飾用鋁單板(GB/T 23443—2009)1532.3.14建築用泡沫鋁板(JG
/T 359—2012)1542.3.15建築用鋁合金遮陽板(JG/T 416—2013)1562.3.16鋁幕牆板用板基(YS/T 429.1—2014)1572.3.17鋁幕牆板用有機聚合物噴塗鋁單板(YS/T 429.2—2012)1592.3.18鋁塑復合板用鋁帶(YS/T 432—2000)1612.3.19鋁塑復合管用鋁及鋁合金帶(箔)(YS/T 434—2009)1612.3.20美鋁曲面裝飾板(JC/T 489—1992)1622.3.21印刷用鋁板基(HG/T 2619—2007)1632.3.22印刷版基用鋁板與帶(YS/T 421—2007)1642.3.23易拉罐罐體用
鋁合金帶(YS/T 435—2009)1662.3.24易拉罐蓋料及拉環料用鋁合金板與帶(YS/T 726—2010)1662.3.25瓶蓋用鋁合金板與帶(YS/T 91—2009)1682.3.26鋁箔用冷軋帶(YS/T 457—2012)1692.3.27汽車用鋁合金板(YS/T 725—2010)1722.3.28鐵道貨車用鋁合金板(YS/T 622—2007)1732.3.29軌道交通用鋁合金板(YS/T 907—2013)1742.3.30船用鋁合金板(GB/T 22641—2008)1792.3.31百葉窗用鋁合金帶(YS/T 621—2007)1912.3.32表盤及裝飾用純鋁板
(YS/T 242—2009)1912.3.33電子行業機櫃用鋁合金板與帶(YS/T 687—2009)1952.3.34電容器外殼用鋁及鋁合金帶(YS/T 727—2010)1962.3.35干式變壓器用鋁帶(箔)(YS/T 713—2009)1972.3.36計算機散熱器用鋁及鋁合金帶(YS/T 772—2011)1982.3.37手機電池殼用鋁合金板與帶(YS/T 712—2009)1992.4鋁及鋁合金箔材2002.4.1鋁及鋁合金箔(GB/T 3198—2010)2002.4.2空調器散熱片用素鋁箔(YS/T 95.1—2009)2062.4.3空調器散熱片用親水鋁箔(YS/T 95
.2—2009)2072.4.4釺焊式熱交換器用鋁合金箔(YS/T 496—2012)2082.4.5電子電力電容器用鋁箔(GB/T 22642—2008)2102.4.6電解電容器用鋁箔(GB/T 3615—2007)2112.4.7半剛性容器用鋁及鋁合金箔(GB/T 22649—2008)2122.4.8卡紙用鋁及鋁合金箔(GB/T 22644—2008)2142.4.9泡罩包裝用鋁及鋁合金箔(GB/T 22645—2008)2152.4.10煙包裝用鋁箔(YS/T 846—2012)2172.4.11軟管用鋁及鋁合金箔(GB/T 22648—2008)2182.4.12啤酒標用鋁合金箔(
GB/T 22646—2008)2192.4.13硬質酚醛泡沫夾芯板用塗層鋁箔(YS/T 849—2012)2202.4.14家用鋁及鋁合金箔(YS/T 852—2012)2212.5鋁及鋁合金管材2222.5.1鋁及鋁合金管的外形尺寸及允許偏差(GB/T 4436—2012)2222.5.2鋁及鋁合金拉(軋)制無縫管(GB/T 6893—2010)2422.5.3鋁及鋁合金熱擠壓無縫圓管(GB/T 4437.1—2000)2442.5.4鋁及鋁合金熱擠壓有縫管(GB/T 4437.2—2003)2462.5.5鋁及鋁合金連續擠壓管(GB/T 20250—2006)2512.5.6鑿岩機用鋁合
金管(YS/T 97—2012)2532.5.7帳篷用高強度鋁合金管(YS/T 847—2012)2542.5.8SB211殼體用919鋁合金厚壁擠壓管(CB 1191—1988)2552.5.9無管芯熱管(GB/T 9082.1—2011)2562.5.10有管芯熱管(GB/T 9082.2—2011)2572.5.11鋁及鋁合金管形導體(GB/T 27676—2011)2582.6鋁及鋁合金棒材2612.6.1一般工業用鋁及鋁合金拉制棒(YS/T 624—2007)2612.6.2鋁及鋁合金擠壓棒(GB/T 3191—2010)2642.6.3鋁及鋁合金擠壓扁棒(板)(YS/T 439—2
012)2722.6.4轎車用高強度鍛鋁合金擠壓圓棒(QC/T 756—2006)2842.6.5活塞用4A11及4032合金擠壓棒(YS/T 493—2005)2842.6.6衡器用鋁合金擠壓扁棒(YS/T 689—2009)2862.6.7煤礦支柱用鋁合金棒(YS/T 589—2006)2862.7鋁及鋁合金桿材2872.7.1電工圓鋁桿(GB/T 3954—2014)2872.7.2電工用稀土高鐵鋁合金桿(GB/T 29920—2013)2882.7.3石油天然氣工業用鋁合金鑽桿(GB/T 20659—2006)2892.8鋁及鋁合金絲材2902.8.1精鋁絲(GB/T 22643—20
08)2902.8.2半導體器件鍵合用鋁絲(YS/T 641—2007)2902.8.3半導體鍵合鋁?1%硅細絲(YS/T 543—2006)2922.8.4交通運輸裝備用鋁合金焊絲(YS/T 458—2012)2932.9鋁及鋁合金線材2942.9.1鋁及鋁合金拉制圓線(GB/T 3195—2008)2942.9.2電工圓鋁線(GB/T 3955—2009)2972.9.3電工用鋁及其合金母線(GB/T 5585.2—2005)2982.9.4電工用鋁及鋁合金扁線(GB/T 5584.3—2009)3012.9.5電力牽引用鋁合金接觸線(GB 12971.5—1991)3022.9.6電氣化
鐵道鋁包鋼芯鋁絞線(TB/T 2937—1998)3032.9.7電纜屏蔽用鋁鎂合金線(GB/T 23309—2009)3052.9.8電纜導體用鋁合金線(GB/T 30552—2014)3062.9.9架空絞線用鋁?鎂?硅合金圓線(GB/T 23308—2009)3082.9.10架空絞線用耐熱鋁合金線(GB/T 30551—2014)3082.9.11鑄軋鋁及鋁合金線坯(YS/T 848—2012)3102.9.12鋁?鈦?硼合金線(YS/T 447.1—2011)3122.9.13鋁?鈦?碳合金線(YS/T 447.2—2011)3142.9.14鋁?鈦合金線(YS/T 447.3—20
11)3152.10鋁及鋁合金型材3162.10.1鋁及鋁合金擠壓型材尺寸偏差(GB/T 14846—2014)3162.10.2一般工業用鋁及鋁合金擠壓型材(GB/T 6892—2006)3362.10.3軌道列車車輛結構用鋁合金擠壓型材(GB/T 26494—2011)3372.10.4箱用鋁合金型材(QB/T 1586.4—2010)3402.10.5太陽能電池框架用鋁合金型材(YS/T 773—2011)3402.10.6軍 用方艙鋁型材(SJ 20431—1994)3422.11鋁及鋁合金鍛件3462.11.1鋁及鋁合金模鍛件的尺寸偏差和加工余量(GB/T 8545—2012)346
2.11.2一般工業用鋁及鋁合金鍛件3522.11.3汽車輪轂用鋁合金模鍛件(GB/T 26036—2010)3572.11.4SB211殼體用919鋁合金模鍛件(CB 1192—1988)3572.12鋁粉3582.12.1空氣霧化鋁粉(GB/T 2085.1—2007)3582.12.2氮氣霧化鋁粉(YS/T 620—2007)3592.12.3球磨鋁粉(GB/T 2085.2—2007)3602.12.4粉碎鋁粉(GB/T 2085.3—2009)3622.12.5煙花爆竹用鋁粉(GB/T 20210—2006)3622.12.6電子陶瓷用氮化鋁粉(SJ 20637—1997)3632.
12.7電子陶瓷用氧化鋁粉體材料(GB/T 15154—1994)3632.12.8軍 用氧化鋁粉體材料(SJ 20608—1996)3642.12.9鋁鎂合金粉(GB/T 5150—2004)3642.13鋁及鋁合金鑄造產品3652.13.1細晶鋁錠(YS/T 489—2005)3652.13.2重熔用鋁錠(GB/T 1196—2008)3652.13.3重熔用精鋁錠(YS/T 665—2009)3662.13.4重熔用鋁稀土合金錠(YS/T 309—2012)3672.13.5鑄造鋁合金錠(GB/T 8733—2007)3672.13.6鋁中間合金錠(YS/T 282—2000)3742.
13.7鋁合金噴射成形圓錠(YS/T 845—2012)3752.13.8耐熱高強韌鑄件用鋁合金錠(GB/T 29434—2012)3752.13.9變形鋁及鋁合金扁鑄錠(YS/T 590—2012)3762.13.10變形鋁及鋁合金圓鑄錠(YS/T 67—2012)3772.13.11鑄造鋁合金(GB/T 1173—2013)3802.13.12鋁合金鑄件(GB/T 9438—2013)3852.13.13壓鑄鋁合金(GB/T 15115—2009)3872.13.14鋁合金壓鑄件(GB/T 15114—2009)3882.13.15冶金設備鋁合金鑄件(YB/T 036.6—1992)389
2.13.16煙草機械用鋁合金鑄件(YC/T 10.8—2006)3912.14其他鋁及鋁合金3922.14.1高純鋁(YS/T 275—2008)3922.14.2鋁蒸發料(GB/T 26036—2010)3932.14.3鋁及鋁合金導體(YS/T 454—2003)3932.14.4鋁中間合金(GB/T 27677—2011)3962.14.5釩鋁中間合金(YS/T 579—2014)3962.14.6鋁鈧中間合金(XB/T 402—2008)3962.14.7鈦合金用鋁硅中間合金(YS/T 776—2011)3962.14.8鈦合金用鋁錫中間合金(YS/T 824—2012)3962.1
4.9 鋁基釺料(GB/T 13815—2008)4022.14.10鋁及鋁合金焊條(GB/T 3669—2001)4042.14.11鋁及鋁合金焊絲(GB/T 10858—2008)4052.14.12鋁及鋁合金廢料(GB/T 13586—2006)408第3章 鎂及鎂合金4133.1鎂及鎂合金加工產品4133.1.1變形鎂及鎂合金的牌號和化學成分(GB/T 5153—2003)4133.1.2鎂及鎂合金板材與帶材(GB/T 5154—2010)4143.1.3鎂合金熱擠壓棒材(GB/T 5155—2013)4173.1.4鎂合金熱擠制矩形棒材(YS/T 588—2006)4193.1.5鎂
合金熱擠壓無縫管(YS/T 697—2009)4213.1.6鎂合金熱擠壓管材(YS/T 495—2005)4223.1.7鎂合金熱擠壓型材(GB/T 5156—2013)4253.1.8鎂合金犧牲陽極(GB/T 17731—2004)4273.1.9鎂合金鍛件(GB/T 26637—2011)4303.2鎂合金鑄造產品4313.2.1原生鎂錠(GB/T 3499—2011)4313.2.2鑄造鎂合金錠(GB/19078—2003)4313.2.3變形鎂及鎂合金用圓鑄錠(YS/T 627—2013)4343.2.4變形鎂及鎂合金扁鑄錠(YS/T 695—2009)4353.2.5鑄造鎂合金(G
B/T 1177—1991)4363.2.6汽車車輪用鑄造鎂合金(GB/T 26654—2011)4373.2.7鎂合金鑄件(GB/T 13820—1992)4383.2.8鎂及鎂合金鑄軋板材(YS/T 698—2009)4433.2.9壓鑄鎂合金(GB/T 25748—2010)4443.2.10鎂合金壓鑄件(GB/T 25747—2010)4453.2.11便攜式工具用鎂合金壓鑄件(YS/T 626—2007)4463.3其他鎂合金產品4473.3.1霧化鎂粉(YS/T 628—2007)4473.3.2銑削鎂粉(GB 5149.1—2004)4483.3.3鎂合金焊絲(YS/T 696—
2009)4493.3.4鎂及鎂合金廢料(GB/T 20926—2007)450第4章 銅及銅合金4534.1銅及銅合金狀態表示方法(GB/T 29094—2012)4534.2加工銅及銅合金的牌號和化學成分(GB/T 5231—2012)4594.3銅及銅合金鍛件的化學成分(GB/T 20078—2008)4734.4銅及銅合金板材與帶材4764.4.1加工銅及銅合金板材與帶材的外形尺寸及允許偏差(GB/T 17793—2010)4764.4.2銅及銅合金板(GB/T 2040—2008)4814.4.3銅及銅合金帶(GB/T 2059—2008)4854.4.4導電用銅板和條(GB/T 2
529—2012)4894.4.5電解用異形導電銅板(GB/T 25286—2010)4934.4.6引線框架用銅及銅合金平帶(GB/T 20254.1—2006)4964.4.7引線框架用銅及銅合金U形帶(GB/T 20254.2—2006)4984.4.8電真空器件用無氧銅板與帶(GB/T 14594—2014)4994.4.9電子元器件用鈹青銅板與帶(SJ 20715—1998)5014.4.10散熱器水室和主片用黃銅帶(GB/T 2532—2014)5044.4.11散熱器冷卻管專用黃銅帶(GB/T 11087—2012)5054.4.12鍾用錫磷青銅帶(QB/T 1543—2014)
5064.4.13鍾表用黃銅板與帶(QB/T 1539—2005)5074.4.14鍾表用鉛黃銅板與帶(QB/T 1911—2007)5084.4.15高爐冷卻壁用銅板(YS/T 811—2012)5094.4.16連鑄結晶器用銅板(YB/T 4119—2004)5104.4.17照相制版用銅板(YS/T 567—2010)5114.4.18鈹青銅板與帶(YS/T 323—2012)5124.4.19耐蝕銅合金板與帶(GB/T 26299—2010)5164.4.20電纜用銅帶(GB/T 11091—2014)5184.4.21變壓器銅帶(GB/T 18813—2014)5194.4.22雷管
用銅和銅合金帶(GB/T 11090—2013)5204.4.23覆合用銅帶(GB/T 26015—2010)5214.4.24屏蔽用鋅白銅帶(GB/T 26301—2010)5224.4.25接觸網用青銅板與帶(GB/T 30016—2013)5244.4.26太陽能裝置用銅帶(YS/T 808—2012)5254.4.27復合觸點材料用銅及銅合金帶(YS/T 974—2014)5274.4.28錳銅及康銅精密電阻合金線、片及帶(GB/T 6145—2010)5284.4.29接插件用銅及銅合金異型帶(YS/T 809—2012)5334.5銅及銅合金箔材5354.5.1工藝銅箔(QB/T
2996—2008)5354.5.2電解銅箔(GB/T 5230—1995)5354.5.3銅及銅合金箔(GB/T 5187—2008)5374.5.4散熱器散熱片專用銅及銅合金箔(GB/T 2061—2013)5384.6銅及銅合金管材5394.6.1銅及銅合金無縫管的規格(GB/T 16866—2006)5394.6.2銅及銅合金毛細管(GB/T 1531—2009)5454.6.3銅及銅合金拉制管(GB/T 1527—2006)5474.6.4銅及銅合金波導管(GB/T 8894—2014)5494.6.5銅及銅合金散熱管(GB/T 8891—2013)5554.6.6銅合金連鑄管(YS
/T 962—2014)5574.6.7銅及銅合金U形管(YS/T 911—2013)5604.6.8銅及銅合金無縫高翅片管(YS/T 865—2013)5614.6.9熱管用無縫銅及銅合金管(GB/T 26302—2010)5624.6.10壓力表用銅合金管(GB/T 8892—2014)5634.6.11壓力容器用鎳銅合金無縫管(JB 4742—2000)5654.6.12空調與制冷設備用無縫銅管(GB/T 17791—2007)5664.6.13空調器連接用保溫銅管(YS/T 670—2008)5664.6.14空調與制冷系統閥件用銅及銅合金無縫管(GB/T 26024—2010)567
4.6.15熱交換器用銅合金無縫管(GB/T 8890—2007)5694.6.16熱交換器用銅及銅合金無縫翅片管(GB/T 19447—2013)5714.6.17電纜用無縫銅管(GB/T 19849—2014)5744.6.18導電用無縫銅管(GB/T 19850—2014)5754.6.19導電用D形銅管(YS/T 760—2011)5774.6.20衛生潔具用黃銅管(YS/T 635—2007)5784.6.21冰箱用高清潔度銅管(YS/T 450—2013)5804.6.22連鑄圓坯結晶器銅管(YB/T 4141—2005)5824.6.23海水淡化裝置用銅合金無縫管(GB/T 23
609—2009)5844.6.24拉桿天線用銅合金套管(YS/T 267—2011)5854.6.25航空散熱管(YS/T 266—2012)5864.6.26磁控管用無氧銅管(GB/T 20301—2006)5894.6.27無縫銅水管和銅氣管(GB/T 18033—2007)5904.6.28無縫內螺紋銅管(GB/T 20928—2007)5914.6.29紅色黃銅無縫管(GB/T 26290—2010)5934.6.30艦船用銅鎳合金無縫管(GB/T 26291—2010)5954.6.31醫用氣體和真空用無縫銅管(YS/T 650—2007)5984.6.32電真空器件用無氧銅管(Y
S/T 909—2013)6004.6.33焊割用銅及銅合金無縫管(GB/T 27672—2011)6034.7銅及銅合金棒材與線材6054.7.1銅及銅合金擠制棒(YS/T 649—2007)6054.7.2銅及銅合金拉制棒(GB/T 4423—2007)6084.7.3易切削銅合金棒(GB/T 26306—2010)6114.7.4再生銅及銅合金棒(GB/T 26311—2010)6144.7.5導電用銅棒(YS/T 615—2006)6164.7.6鈹青銅棒(YS/T 334—2009)6174.7.7接觸網用青銅棒(GB/T 30015—2013)6194.7.8電子元器件用鈹青銅線與
棒(SJ 20716—1998)6214.7.9電極材料用鉻鋯青銅棒(YS/T 584—2006)6224.7.10鍾表用鉛黃銅棒與線(QB/T 1542—2005)6244.7.11表用鎳鋅白銅棒(QB/T 2022—2007)6254.7.12熱鍛水暖管件用黃銅棒(YS/T 583—2006)6264.7.13注射器針座用鉛黃銅棒(YS/T 77—2011)6274.7.14鉛黃銅拉花棒(YS/T 76—2010)6284.7.15數控車床用銅合金棒(YS/T 551—2009)6294.7.16電真空器件用無氧銅棒與線(YS/T 812—2012)6334.7.17銅及銅合金線(GB/T
21652—2008)6354.7.18易切削銅合金線(GB/T 26048—2010)6474.7.19銅及銅合金扁線(GB/T 3114—2010)6494.7.20電力牽引用銅及銅合金接觸線(GB/T 12971.1—2008)6514.7.21電子器件用鍍錫銅線(SJ 2422—1983)6534.7.22電工圓銅線(GB/T 3953—2009)6544.7.23電工用銅及銅合金母線(GB/T 5585.1—2005)6574.7.24電工用銅扁線(GB/T 5584.2—2009)6614.7.25電工用銅線坯(GB/T 3952—2008)6624.7.26電工軟銅絞線(GB/
T 12970.2—2009)6644.7.27電工軟銅天線(GB/T 12970.3—2009)6674.7.28電工軟銅電刷線(GB/T 12970.4—2009)6674.7.29電氣化鐵道用銅及銅合金絞線(TB/T 3111—2005)6694.7.30電氣化鐵道用銅及銅合金接觸線(TB/T 2809—2005)6704.7.31鈹青銅線(YS/T 571—2006)6714.7.32鍍錫圓銅線(GB/T 4910—2009)6724.7.33鍍銀軟圓銅線(JB/T 3135—2011)6734.7.34鍍鎳圓銅線(GB/T 11019—2009)6754.7.35鍾用黃銅線(QB/T
1540—2005)6774.7.36半導體器件鍵合用銅絲(YS/T 678—2008)6784.7.37單向走絲電火花加工用黃銅線(YS/T 868—2013)6794.8銅粉6814.8.1片狀銅粉(GB/T 26036—2010)6814.8.2電解銅粉(GB/T 5246—2007)6814.8.3霧化銅粉(YS/T 499—2006)6824.8.4霧化CuSn10青銅粉(JB/T 7380—2010)6824.8.5霧化6?6?3錫青銅粉(JB/T 6648—2010)6834.8.6氣霧化錫青銅球形粉末(JB/T 6649—2010)6834.9銅及銅合金鑄造產品6844.9.
1高純銅鑄錠(YS/T 919—2013)6844.9.2鑄造銅合金錠(YS/T 544—2009)6854.9.3銅銦合金錠(YS/T 1015—2014)6894.9.4銅中間合金錠(YS/T 283—2009)6904.9.5銅鈹中間合金錠(YS/T 260—2004)6914.9.6鑄造銅及銅合金(GB/T 1176—2013)6924.9.7銅及銅合金鑄件(GB/T 13819—2013)7024.9.8冶金設備用銅合金鑄件(YB/T 036.5—1992)7024.9.9銅及銅合金鑄棒(YS/T 759—2011)7044.9.10再生鑄造鉛黃銅型材(YS/T 862—2013)7
064.9.11壓鑄銅合金(GB/T 15116—1994)7094.10其他銅及銅合金7114.10.1粗銅(YS/T 70—2005)7114.10.2黑銅(YS/T 632—2007)7114.10.3冰銅(YS/T 921—2013)7114.10.4陰極銅(GB/T 467—2010)7124.10.5銅陽極泥(YS/T 981—2014)7134.10.6陽極純銅粒(YS/T 912—2013)7134.10.7陽極磷銅材(GB/T 20302—2014)7144.10.8導電用銅型材(GB/T 27671—2011)7154.10.9銅基釺料(GB/T 6418—2008)716
4.10.10銅及銅合金焊絲(GB/T 9460—2008)7194.10.11銅及銅合金焊條(GB/T 3670—1995)7224.10.12銅及銅合金廢料(GB/T 13587—2006)723第5章 鋅及鋅合金7275.1鋅及鋅合金加工產品7275.1.1電池鋅餅(GB/T 3610—2010)7275.1.2電池用鋅板和鋅帶(YS/T 565—2010)7285.1.3鋅陽極板(GB/T 2056—2005)7295.1.4照相制版用微晶鋅板(YS/T 225—2010)7305.2鋅及鋅合金鑄造產品7315.2.1鋅錠(GB/T 470—2008)7315.2.2鑄造用鋅合金錠(G
B/T 8738—2014)7315.2.3再生鋅合金錠(GB/T 21651—2008)7315.2.4熱鍍用鋅合金錠(YS/T 310—2008)7325.2.5鑄造用鋅中間合金錠(YS/T 994—2014)7335.2.6鑄造鋅合金(GB/T 1175—1997)7335.2.7鋅合金鑄件(GB/T 16746—1997)7355.2.8壓鑄鋅合金(GB/T 13818—2009)7365.2.9鋅合金壓鑄件(GB/T 13821—2009)7365.3其他鋅及鋅合金7375.3.1高純鋅(YS/T 920—2013)7375.3.2鋅粉(GB/T 6890—2012)7385.3.3
片狀鋅粉(GB/T 26035—2010)7385.3.4無汞鋅粉(GB/T 26039—2010)7395.3.5轉底爐法粗鋅粉(YB/T 4271—2012)7395.3.6無砷鋅粒(GB/T 2304—2008)7405.3.7鋅陽極泥(YS/T 993—2014)7405.3.8鋅及鋅合金廢料(GB/T 13589—2007)740第6章 鈦及鈦合金7426.1鈦及鈦合金的牌號和化學成分(GB/T 3620.1—2007)7426.2鈦及鈦合金加工產品的化學成分允許偏差(GB/T 3620.2—2007)7486.3鈦及鈦合金板材、帶材與箔材7496.3.1鈦及鈦合金板(GB/T 36
21—2007)7496.3.2鈦及鈦合金帶與箔(GB/T 3622—2012)7536.3.3TC4 ELI鈦合金板(GB/T 31297—2014)7556.3.4TC4鈦合金厚板(GB/T 31298—2014)7566.3.5制表用純鈦板(YS/T 580—2006)7576.3.6板式換熱器用鈦板(GB/T 14845—2007)7576.3.7鈦及鈦合金網板(GB/T 26059—2010)7586.3.8冷軋鈦帶卷(GB/T 26723—2011)7596.3.9熱軋鈦帶卷(YS/T 750—2011)7606.3.10焊管用鈦帶(YS/T 658—2007)7626.4鈦及鈦合
金管材7626.4.1鈦及鈦合金無縫管(GB/T 3624—2010)7626.4.2鈦及鈦合金焊接管(GB/T 26057—2010)7646.4.3鈦及鈦合金擠壓管(GB/T 26058—2010)7656.4.4鈦制對焊無縫管件(HG/T 3651—1999)7676.4.5工業流體用鈦及鈦合金管(YS/T 576—2006)7686.4.6換熱器及冷凝器用鈦及鈦合金管(GB/T 3625—2007)7706.5鈦及鈦合金棒材與絲材7726.5.1鈦及鈦合金棒(GB/T 2965—2007)7726.5.2鈦及鈦合金絲(GB/T 3623—2007)7756.5.3外科植入物用鈦及鈦合金
加工絲(GB/T 13810—2007)7776.6鈦及鈦合金鍛造與鑄造產品7776.6.1鈦及鈦合金鍛件(GB/T 25137—2010)7776.6.2鈦及鈦合金鍛造板坯(YS/T 885—2013)7836.6.3外科植入物用Ti6Al4V鈦合金鍛件(YY 0117.1—2005)7836.6.4外科植入物用ZTi6Al4V鈦合金鑄件(YY 0117.2—2005)7836.6.5鑄造鈦及鈦合金(GB/T 15073—2014)7846.6.6鈦及鈦合金鑄錠(GB/T 26060—2010)7866.6.7鈦及鈦合金鑄件(GB/T 6614—2014)7866.7其他鈦及鈦合金7876.
7.1海綿鈦(GB/T 2524—2010)7876.7.2鈦粉(YS/T 654—2007)7886.7.3煙花用鈦粉(NY/T 756—2003)7886.7.4煙花爆竹用鈦粉(GB/T 20211—2006)7896.7.5鈦及鈦合金餅和環(GB/T 16598—2013)7906.7.6鈦及鈦合金焊絲(GB/T 30562—2014)7916.7.7鈦及鈦合金廢料(GB/T 20927—2007)794第7章 鎳及鎳合金7967.1加工鎳及鎳合金的化學成分(GB/T 5235—2007)7967.2鎳及鎳合金板材與帶材7997.2.1鎳及鎳合金板(GB/T 2054—2013)7997
.2.2鎳及鎳合金帶(GB/T 2072—2007)8017.2.3電真空器件用鎳有鎳合金帶(SJ 1541—1987)8037.3鎳及鎳合金管材8047.3.1鎳及鎳合金管(GB/T 2882—2013)8047.3.2電真空器件用鎳及鎳合金薄壁管(SJ 1539—1987)8077.3.3壓力容器用鎳銅合金無縫管(JB 4742—2000)8087.4鎳及鎳合金棒材與絲材8107.4.1鎳及鎳銅合金棒(GB/T 4435—2010)8107.4.2鎳及鎳合金線及拉制線坯(GB/T 21653—2008)8127.4.3電真空器件用鎳及鎳合金絲(SJ 1540—1987)8137.4.4顯像
管用鎳及鎳合金線(JB/T 10234—2001)8147.5其他鎳及鎳合金8157.5.1高純鎳(GB/T 26016—2010)8157.5.2鎳蒸發料(GB/T 26032—2010)8167.5.3電池用泡沫鎳(GB/T 20251—2006)8177.5.4電解鎳(GB/T 6516—2010)8187.5.5電解鎳粉(GB/T 5247—2012)8197.5.6納米鎳粉(GB/T 19588—2004)8207.5.7羰基鎳粉(GB/T 7160—2008)8207.5.8超細羰基鎳粉(YS/T 218—2011)8217.5.9霧化鎳粉(YS/T 717—2009)8227.5
.10還原鎳粉(YS/T 925—2013)8227.5.11粉末冶金用再生鎳粉(YS/T 889—2013)8237.5.12燒結鎳片(YS/T 720—2009)8237.5.13鎳箔(YS/T 522—2010)8237.5.14鎳基噴塗合金粉(YS/T 537—2006)8247.5.15鎳硼硅系自熔合金粉(YS/T 526—2006)8257.5.16鎳鉻硼硅系自熔合金粉 (YS/T 527—2014)8257.5.17鎳基釺料(GB/T 10859—2008)8267.5.18鎳及鎳合金焊絲(GB/T 15620—2008)8287.5.19鎳及鎳合金焊條(GB/T 13814—2
008)8337.5.20鎳及鎳合金廢料(GB/T 21179—2007)839第8章 鉛錫銻及其合金8418.1鉛及鉛合金8418.1.1高純鉛(YS/T 265—2012)8418.1.2粗鉛(YS/T 71—2013)8418.1.3鉛錠(YS/T 469—2013)8418.1.4再生鉛及鉛合金錠(GB/T 21181—2007)8428.1.5電解沉積用鉛陽極板(YS/T 498—2006)8438.1.6鉛及鉛銻合金板(GB/T 1470—2014)8448.1.7鉛及鉛銻合金管(GB/T 1472—2014)8458.1.8鉛及鉛銻合金棒和線材(YS/T 636—2007)848
8.1.9保險鉛絲(GB 3132—1982)8498.1.10鉛及鉛合金廢料(GB/T 13588—2006)8528.2錫及錫合金8548.2.1高純錫(YS/T 44—2011)8548.2.2錫粉(GB/T 26304—2010)8548.2.3電子產品焊接用錫合金粉(SJ/T 11391—2009)855·ⅩⅦ·8.2.4錫錠(GB/T 1599—2014)8558.2.5錫陽極泥(YS/T 992—2014)8568.2.6錫陽極板(GB/T 2056—2005)8568.2.7免清洗焊接用焊錫絲(SJ/T 11168—1998)8568.2.8錫鉛釺料(GB/T 3131—200
1)8578.2.9鑄造錫鉛焊料(GB/T 8012—2013)8628.2.10無鉛錫基焊料(YS/T 747—2010)8638.2.11錫及錫合金廢料(GB/T 21180—2007)8658.3銻及銻合金8668.3.1高純銻(GB/T 10117—2009)8668.3.2銻錠(GB/T 1599—2014)8668.3.3高鉛銻錠(YS/T 415—2011)8678.3.4銻鈹芯塊(YS/T 425—2013)867第9章 稀土金屬及其合金8689.1稀土金屬及其化合物8689.1.1金屬釓(XB/T 212—2006)8689.1.2氧化釓(GB/T 2526—2008)868
9.1.3氧化釔(GB/T 3503—2006)8699.1.4熒光級氧化釔銪(GB/T 16482—2009)8699.1.5金屬釤(GB/T 2968—2008)8709.1.6氧化釤(GB/T 2969—2008)8709.1.7金屬釹(GB/T 9967—2010)8719.1.8氟化釹(XB/T 214—2006)8719.1.9氧化釹(GB/T 5240—2006)8719.1.10金屬鈧(GB/T 16476—2010)8729.1.11氧化鈧(GB/T 13219—2010)8739.1.12氧化鈥(XB/T 201—2006)8739.1.13氧化鈰(GB/T 4155—20
12)8749.1.14碳酸鈰(GB/T 16661—2008)8749.1.15氧化鉺(GB/T 15678—2010)8749.1.16氧化銩(XB/T 202—2010)8759.1.17金屬鋱(GB/T 20893—2007)8769.1.18金屬鏑(GB/T 15071—2008)8769.1.19氟化鏑(XB/T 215—2006)8779.1.20氧化鏑(GB/T 13558—2008)8779.1.21氧化鑥(XB/T 204—2006)8779.1.22金屬鑭(GB/T 15677—2010)8779.1.23氧化鑭(GB/T 4154—2006)8789.1.24六硼化鑭(
XB/T 501—2008)8799.1.25金屬鐠(GB/T 19395—2013)8799.1.26氧化鐠(GB/T 5239—2006)8809.1.27鐠釹合金(GB/T 20892—2007)8809.1.28氧化鐿(XB/T 203—2006)880ⅩⅧ·9.2稀土磁性材料8819.2.1黏結釹鐵硼永磁材料(GB/T 18880—2012)8819.2.2快淬釹鐵硼永磁粉(GB/T 20168—2006)8839.2.3稀土鈷永磁材料(GB/T 4180—2000)8839.2.4鐵鈷釩永磁合金(GB/T 14989—1994)8869.2.5鋱鏑鐵大磁致伸縮材料(GB/T 193
96—2012)8879.3混合稀土8889.3.1混合稀土金屬(GB/T 4153—2008)8889.3.2混合氯化稀土(GB/T 4148—2003)8899.3.3富鑭混合稀土金屬(YB/T 1516—1983)8899.3.4混合稀土金屬絲及棒(YB/T 010—1992)8909.3.5碳酸輕稀土(GB/T 16479—2008)8909.4稀土合金8909.4.1稀土硅鐵合金(GB/T 4137—2004)8909.4.2稀土鎂硅鐵合金(GB/T 4138—2004)891第10章 稀有金屬及其合金89210.1釩及釩合金89210.1.1釩(GB/T 4310—1984)892
10.1.2釩氮合金(GB/T 20567—2006)89210.2鎢及鎢合金89210.2.1鎢及鎢合金加工產品的牌號和化學成分(YS/T 659—2007)89210.2.2鎢板(GB/T 3875—2006)89310.2.3抗射線用高精度鎢板(GB/T 26023—2010)89410.2.4鎢基高比重合金板材(GB/T 26038—2010)89510.2.5鎢條(GB/T 3459—2006)89710.2.6摻雜鎢條(GB/T 4189—1984)89710.2.7軍 用電子管用鎢帶(SJ 20513—1995)89710.2.8鎢絲(GB/T 4181—1997)89810.2
.9鎢絞絲(SJ/T 11062—1996)90010.2.10鎢錸合金絲(GB/T 4184—2002)90110.2.11推拉鎢絲(SJ 20599—1996)90210.2.12電子器件用鎢絲(SJ 20143—1992)90310.2.13照明及電子設備用鎢絲(GB/T 23272—2009)90410.2.14鎢桿(GB/T 4187—1984)90610.2.15鎢釷合金絲桿(SJ/T 10536.1—1994)90710.2.16鎢釷合金桿(SJ/T 10536.2—1994)90810.2.17斷電器觸點用鎢桿(JB/T 9860.2—1999)91010.2.18鎢粉(GB/
T 3458—2006)91010.2.19超細鎢粉(GB/T 26726—2011)91110.2.20碳化鎢粉(GB/T 4295—2008)912·ⅩⅨ·10.2.21鑄造碳化鎢粉(GB/T 2967—2008)91210.2.22合成白鎢(YS/T 524—2011)91410.2.23鎢及鎢合金廢料(GB/T 26496—2011)91410.3鉬及鉬合金91710.3.1鉬及鉬合金加工產品的牌號和化學成分(YS/T 660—2007)91710.3.2鉬粉(GB/T 3461—2006)91910.3.3鉬箔(GB/T 3877—2006)91910.3.4鉬片(SJ 324—19
72)92010.3.5鉬圓片(GB/T 14592—2014)92110.3.6沖制鉬圓片(SJ/T 10168.2—1991)92210.3.7電力半導體器件用鉬圓片(JB/T 9687.1—1999)92210.3.8摻雜鉬條(GB/T 4190—1984)92310.3.9鉬鎢合金條(GB/T 4185—1984)92310.3.10鉬條和鉬板坯(GB/T 3462—2007)92310.3.11鉬及鉬合金板(GB/T 3876—2007)92410.3.12鉬絲(GB/T 4182—2003)92610.3.13鉬鎢合金絲(GB/T 4183—2002)92810.3.14軍 用覆鉑
鉬絲(SJ 20145—1992)92910.3.15鉬及鉬合金棒(GB/T 17792—2014)93010.3.16鉬桿(GB/T 4188—2002)93110.3.17鉬鎢合金桿(GB/T 4186—2002)93210.3.18電子器件用鉬桿、鉬絲及鉬片(SJ 20144—1992)93210.3.19鉬及鉬合金廢料(GB/T 27687—2011)93510.4鉭及鉭合金93510.4.1冶金用鉭粉(YS/T 259—2012)93510.4.2鉭錠(YS/T 827—2013)93610.4.3電容器用鉭箔(YS/T 640—2007)93710.4.4鉭條(YS/T 1005—
2014)93810.4.5深沖用粉末冶金鉭板(GB/T 26037—2010)93810.4.6鉭及鉭合金板、帶和箔(GB/T 3629—2006)93910.4.7電容器用鉭絲(GB/T 26012—2010)94110.4.8鉭及鉭合金棒(GB/T 14841—2008)94210.4.9鉭及鉭合金無縫管(GB/T 8182—2008)94410.4.10鉭及鉭合金廢料(GB/T 25955—2010)94510.5鈮及鈮合金94610.5.1冶金用鈮粉(YS/T 258—2011)94610.5.2鈮錠(YS/T 884—2013)94710.5.3鈮條(GB/T 6896—2007)
948·ⅩⅩ·10.5.4鈮板、帶和箔(GB/T 3630—2006)94810.5.5鈮及鈮鋯合金絲(GB/T 26062—2010)95010.5.6陰極保護用鉑鈮復合陽極絲(YS/T 642—2007)95010.5.7鈮及鈮合金棒(GB/T 14842—2007)95110.5.8鈮及鈮合金無縫管(GB/T 8183—2007)95210.5.9電光源用鈮鋯合金無縫管(GB/T 26009—2010)95410.5.10鈮及鈮合金廢料(GB/T 27688—2011)95410.6鈹及鈹合金95510.6.1銅鈹中間合金錠(YS/T 260—2004)95510.6.2鈹片(YS/T
41—2005)95610.6.3真空熱壓鈹材(GB/T 26056—2010)95710.7錸及錸合金95810.7.1高錸鎢錸合金絲(SJ 20745—1999)95810.7.2電真空器件用釷鎢錸絲(SJ 1587—1980)95910.8鋰及鋰合金95910.8.1鋰(GB/T 4369—2007)95910.8.2鋰圓片(GB/T 26064—2010)95910.8.3鋰帶(GB/T 20930—2007)96010.8.4鋰硼合金(YS/T 905—2013)96010.9鋯及鋯合金96110.9.1海綿鋯(YS/T 397—2007)96110.9.2吸氣用鋯鋁合金粉(YS/T
529—2006)96110.9.3鋯及鋯合金鑄錠(GB/T 8767—2010)96210.9.4鋯及鋯合金板、帶和箔(GB/T 21183—2007)96210.9.5吸氣用鋯鋁合金環件和片件(YS/T 531—2006)96510.9.6鋯及鋯合金棒和絲(GB/T 8769—2010)96610.9.7鋯及鋯合金無縫管(GB/T 26283—2010)96710.9.8鋯及鋯合金鍛件(GB/T 30568—2014)96910.9.9鋯及鋯合金焊絲(YS/T 887—2013)96910.9.10鋯及鋯合金廢料(GB/T 26931—2011)97010.10鍺及鍺合金97110.10
.1再生鍺原料(GB/T 23522—2009)97110.10.2鍺粒(YS/T 989—2014)97210.10.3區熔鍺錠(GB/T 11071—2006)97210.10.4還原鍺錠(GB/T 11070—2006)97210.10.5鍺單晶(GB/T 5238—2009)97310.10.6太陽能電池用鍺單晶(GB/T 26072—2010)97410.11銦及銦合金974·ⅩⅪ·10.11.1銦錠(YS/T 257—2009)97410.11.2高純銦(YS/T 264—2012)97410.11.3銦廢料(GB/T 26727—2011)97510.12鎵及鎵合金97510.1
2.1鎵(GB/T 1475—2005)97510.12.2高純鎵(GB/T 10118—2009)97610.12.3鎵廢料(YS/T 948—2014)97610.13鉈及砷97710.13.1鉈(YS/T 224—1994)97710.13.2砷(YS/T 68—2014)97710.13.3高純砷(YS/T 43—2011)978第11章 貴金屬及其合金97911.1貴金屬及其合金常用加工產品97911.1.1貴金屬及其合金板材與帶材(YS/T 201—2007)97911.1.2貴金屬及其合金箔材(YS/T 202—2009)98511.1.3貴金屬及其合金異形絲材(GB/T 235
16—2009)98611.1.4貴金屬及其合金釺料(GB/T 18762—2002)98811.2釕及釕合金99311.2.1釕粉(YS/T 682—2008)99311.2.2釕基厚膜電阻漿料(YS/T 607—2006)99411.3金及金合金99511.3.1超細金粉(GB/T 1775—2009)99511.3.2金錠(GB/T 4134—2003)99511.3.3合質金錠(GB/T 8930—2001)99511.3.4金箔(QB/T 1734—2008)99611.3.5半導體封裝用鍵合用金絲(GB/T 8750—2014)99611.3.6金基厚膜導體漿料(YS/T 604—
2006)99811.3.7金砷蒸發料(YS/T 954—2014)99911.3.8金鍺蒸發料(GB/T 26292—2010)100011.4鈀及鈀合金100011.4.1海綿鈀(GB/T 1420—2004)100011.4.2氯化鈀(GB/T 8185—2004)100111.4.3超細氧化鈀粉(YS/T 599—2006)100111.4.4氫氣凈化器用鈀合金箔(YS/T 208—2006)100211.4.5氫氣凈化用鈀合金管(YS/T 416—1999)100211.4.6光譜分析用鈀基體(YS/T 83—2006)100311.4.7銀鈀厚膜導體漿料(YS/T 614—2006
)100411.5鉑及鉑合金100411.5.1海綿鉑(GB/T 1419—2004)100411.5.2高純海綿鉑(YS/T 81—2006)100511.5.3超細鉑粉(GB/T 1776—2009)100611.5.4鉑電極漿料(YS/T 609—2006)1006·ⅩⅫ·11.5.5電阻溫度計用鉑絲(GB/T 5977—1999)100611.5.6微型熱電偶用鉑銠細偶絲(GB/T 18034—2000)100711.5.7電容式變送器用鉑銠合金毛細管(YS/T 597—2006)100811.5.8光譜分析用鉑基體(YS/T 82—2006)100811.6銠及合金100911.6.
1銠粉(GB/T 1421—2004)100911.6.2光譜分析用銠基體(YS/T 85—2006)101011.7銥及銥合金101011.7.1銥粉(GB/T 1422—2004)101011.7.2銥管(YS/T 790—2012)101111.7.3光譜分析用銥基體(YS/T 84—2006)101111.8銀及銀合金101111.8.1片狀銀粉(GB/T 1773—2008)101111.8.2超細銀粉(GB/T 1774—2009)101211.8.3銀錠(GB/T 4135—2002)101211.8.4銀蒸發料(GB/T 24309—2010)101211.8.5燒結型銀導體漿
料(YS/T 603—2006)101311.8.6固化型銀導體漿料(YS/T 606—2006)101611.8.7銀條(YS/T 857—2012)101711.8.8鉭電容器用銀銅合金棒、管和帶(GB/T 23521—2009)101711.8.9保險管用銀銅合金絲(GB/T 23515—2009)101911.8.10換向器用銀銅合金線(JB/T 8987—1999)101911.8.11銀釺料(GB/T 10046—2008)102011.8.12電子器件用金、銀及其合金釺焊料(SJ/T 10753—1996)102411.8.13銀廢料(GB/T 26308—2010)1025第1
2章 有色金屬復合材料102712.1有色金屬復合板材102712.1.1復合材料的最小抗拉強度102712.1.2普通裝飾用鋁塑復合板(GB/T 22412—2008)102712.1.3建築幕牆用鋁塑復合板(GB/T 17748—2008)102912.1.4壓力容器爆炸焊鎳鋼復合板(NB/T 47002.2—2009)103112.1.5金屬及金屬復合材料吊頂板(GB/T 23444—2009)103212.1.6釺焊用鋁及鋁合金復合板(YS/T 69—2012)103612.1.7鈦?不銹鋼復合板(GB/T 8546—2007)104012.1.8鈦?鋼復合板(GB/T 8547—20
06)104212.1.9銅?鋼復合板(GB/T 13238—1991)104412.1.10鎳?鋼復合板(YB/T 108—1997)104512.1.11鋯?鋼復合板(YB/T 777—2011)104612.2有色金屬復合帶材與箔材1047·Ⅹ·12.2.1電站空冷用鋁合金復合帶(YS/T 906—2013)104712.2.2銀及銀合金?銅及銅合金復合帶(GB/T 26330—2010)104912.2.3吸氣用鋯鋁合金復合帶(YS/T 530—2006)105512.2.4釺焊式熱交換器用鋁合金復合箔與帶(YS/T 446—2011)105712.2.5貴金屬及其合金復合帶(GB/
T 15159—2008)106012.2.6熱雙金屬帶(GB/T 4461—2007)106412.2.7鋁塑復合管用鋁及鋁合金帶(YS/T 434—2009)106812.2.8釋汞吸氣用復合帶(YS/T 532—2006)106812.3有色金屬復合管材107012.3.1內層熔接型鋁塑復合管(CJ/T 193—2004)107012.3.2外層熔接型鋁塑復合管(CJ/T 195—2004)107212.3.3鋁管對接焊式鋁塑管(GB/T 18997.2—2003)107312.3.4鋁管搭接焊式鋁塑管(GB/T 18997.1—2003)107512.3.5無規共聚聚丙烯(PP?R)塑
鋁穩態復合管(CJ/T 210—2005)107712.3.6耐熱聚乙烯(PE?RT)塑鋁穩態復合管(CJ/T 238—2006)108012.4有色金屬復合棒材與線材108212.4.1鈦?銅復合棒(GB/T 12769—2003)108212.4.2電力牽引用鋼鋁復合接觸線(GB 12971.4—1991)108412.4.3電工用鋁包鋼線(GB/T 17937—2009)108512.5有色金屬復合粉108712.5.1鋁包鎳復合粉(YS/T 528—2013)108712.5.2鎳包氧化鋁復合粉(YS/T 510—2012)108812.5.3鎳包銅復合粉(YS/T 513—2013)
108912.5.4鎳包鋁復合粉(GB/T 3989—1983)108912.5.5鎳包鉻復合粉(YS/T 512—2013)109012.5.6鈷碳化鎢復合粉(YS/T 511—2014)109112.5.7鐵青銅復合粉(YS/T 706—2009)1092附錄1094附錄A常用金屬材料力學性能符號新舊對照1094附錄B中外常用有色金屬材料牌號對照1095參考文獻1115
ti6al4v進入發燒排行的影片
應用自開發之程序控制系統於電漿電解氧化製程以探討氧化膜性能提升機制之研究
為了解決ti6al4v 的問題,作者黃冠諭 這樣論述:
誌謝 I中文摘要 II英文摘要 IV目次 VI圖目次 X表目次 XVIIIChapter.1 前言 11.1 電漿電解氧化技術的發展背景 11.2 研究動機 4Chapter.2 電漿電解氧化處理 52.1 電漿電解氧化(PEO) 52.1.1 電漿電解氧化機制原理 62.1.2 膜層電擊穿機制 112.1.3 電漿電解氧化之電源參數影響 152.1.4 PEO製程的物理/化學反應機制 182.2 PEO氧化膜層特性 252.2.1 膜層的反應與形成機制 252.2.2 PEO處理中常見的基材金屬 292.3 PEO製程常見的電解
質成分 342.4 程序控制法 382.5 應用於Mn摻雜TiO2光催化劑薄膜 402.5.1 揮發性有機汙染物 402.5.2 光催化反應機制 412.5.3 Mott-Schottky方程 442.5.4 二氧化鈦光觸媒 462.5.5 二氧化鈦光觸媒的製備方法 512.5.6 提升二氧化鈦光觸媒光吸收效能之技術 542.6 應用於HA與L乳酸鈣於生醫改質氧化膜層 572.6.1 PEO於生醫改質之發展與應用 572.6.2 PEO生醫改質中常見的金屬植體 582.6.3 氫氧基磷灰石與L-乳酸鈣於生醫改質之用途 592.7 研究目的與實
驗規劃 61Chapter.3 程序控制法於PEO製程之應用 633.1 實驗方法 633.1.1 程序控制系統與設備 633.1.2 實驗設計 643.1.3 Mn: TiO2光催化劑實驗流程設計 683.1.4 以懸浮液搭配程序控制PEO製備TiO2膜層之流程設計 713.1.5 以離子溶液液搭配程序控制PEO製備TiO2膜層之流程設計 743.2 實驗基材選用與藥品準備 773.3 程序控制法於PEO製程基本分析 793.3.1 電源系統監控分析 793.3.2 膜層表面形貌與成分分析 793.3.3 孔徑與孔隙率分析 793.3.4
晶體結構相組成分析 803.3.5 紫外光-可見光吸收光譜分析 813.3.6 載子濃度分析 813.3.7 X射線光電子能譜分析 823.3.8 懸浮微粒之粒徑大小分析 83Chapter.4 多階段程序控制於PEO處理製備摻雜Mn: TiO2光催化劑 844.1 Mn: TiO2光催化劑特性探討 844.1.1 第一步驟製程設計對二氧化鈦膜層影響 844.1.2 不同含浸濃度錳離子對於二氧化鈦特性比較 904.1.3 不同電源模式含錳離子之二氧化鈦特性差異 1034.1.4 含浸法對錳離子含量之影響與離子機制之探討 1144.2 光觸媒催化效能測
試 119Chapter.5 以懸浮液搭配多階段程序控制PEO進行TiO2膜層製備 1215.1 HA於多階段程序控制PEO之影響 1215.1.1 單階段程序控制於PEO膜層特性之探討 1215.1.2 雙階段程序控制於PEO膜層特性之探討 1225.1.3 多階段程序控制於PEO膜層特性之探討 1295.2 HA於增加陽極氧化前處理之影響 1415.2.1 陽極處理膜層之特性探討 1415.2.2 陽極處理-多階段程序控制PEO膜層特性探討 142Chapter.6 以離子溶液搭配多階段程序控制PEO進行TiO2膜層製備 1626.1 電解液A於PE
O不同階段製程之膜層特性探討 1626.1.1 電解液A之乳酸鈣於雙階段PEO製程影響 1626.1.2 電解液A之乳酸鈣於三階段PEO製程影響 1706.2 電解液B於PEO不同階段製程之膜層特性探討 1736.2.1 電解液B之乳酸鈣於雙階段PEO製程影響 1736.2.2 電解液B之乳酸鈣於三階段PEO製程影響 182Chapter.7 結論與未來展望 1917.1 結論 1917.2 未來展望 192參考文獻 193
以冷凍乾燥法製備鈦酸鋇 /ꞵ 三鈣磷酸鹽 /膠原蛋白複合支架與性質鑑定
為了解決ti6al4v 的問題,作者吳亭葦 這樣論述:
針對牙周病與蛀牙問題,患者容易有齒槽骨萎縮之症狀伴隨出血等情況。本研究開發一種治療牙齒脫落後造成的齒槽骨缺損之填充材料應用於齒槽骨保存手術。本實驗設計此填充材料含有三種成分:壓電陶瓷鈦酸鋇(BT)、β-三鈣磷酸鹽(β-TCP)和膠原蛋白。 BT具有人骨的壓電特性,可自發極化產生電訊號刺激骨生長,β-TCP具有良好的生物降解性,膠原蛋白能起到凝血作用,有助於術後止血及修復,並透過冷凍乾燥法在填充材上建立孔洞,提供組織和血管的生長空間。基於上述優點,填充材預計可提高患者齒槽骨的恢復速度,縮短療程,從而減輕患者的痛苦。此研究中製備了不同比例之BT/β-TCP結合膠原蛋白的多孔複合材料。而後通過X射
線繞射(XRD)分析晶體結構,利用掃描電子顯微鏡研究微結構和形貌;藉由壓汞測孔儀測量孔隙率及孔洞大小;萬能試驗機測量其機械性質;毛細作用測試其對液體吸附速率。生物相容性測試則使用ISO10993-5之濃度標準進行細胞存活率分析(MTT assay)。結果顯示噴霧乾燥法造粒之45wt%BT/ 45wt%ꞵ-TCP/ 10wt%collagen複合材料有較佳的性質穩定性,其孔隙率為85.25%,機械強度3.19±0.41 MPa,28天之生物降解量為8.69±0.40wt%,生物相容性之細胞存活率達99.86±2.17%,並且在毛細作用測試有相對快速的液體吸附速率表現,有助於臨床應用上快速吸附並穩
定血塊的效果。
想知道ti6al4v更多一定要看下面主題
ti6al4v的網路口碑排行榜
-
#1.Desktop Metal qualifies Ti6Al4V for the Studio System 2 - PIM ...
Desktop Metal, Inc, Burlington, Massachusetts, USA, has qualified the use of titanium alloy Ti6Al4V for its Studio System 2™ metal Additive ... 於 www.pim-international.com -
#2.Laser polishing of additive manufactured Ti6Al4V alloy: a review
Ti6Al4V is applicable in areas of aerospace, shipbuilding, biomedical, and so on. For example, in the field of aerospace, titanium alloy is used ... 於 www.spiedigitallibrary.org -
#3.ChemPolish Ti6Al4V™ - RBP Chemical Technology
ChemPolish Ti6Al4V is formulated to deoxidize and chemically polish titanium grade 5 and other high Ti alloys. Depending on an incoming surface condition ... 於 rbpchemical.com -
#4.TI-6AL-4V鈦合金到底有多耐腐蝕? - 壹讀
Ti6Al4V 強於其他商業純鈦,但仍保持相同的硬度和熱性能(不包括導熱性)。 Ti6Al4V廣泛應用於航空航天、醫療、船舶、化學加工、刀片、唱片、生物醫學植入物 ... 於 read01.com -
#5.Ti 6Al-4V ELI - Fort Wayne Metals
One of the most commonly used titanium alloys is an alpha-beta alloy containing 6% Al and 4% V. This alloy, usually referred to as Ti 6Al-4V, exhibits an ... 於 www.fwmetals.com -
#6.ti-6al-4v - 人氣推薦- 2021年11月| 露天拍賣
快速出貨Ti TC4鈦合金M5*30,35,40mm(不含華司墊片)鈦螺絲座管/坐管合金螺絲非64鈦Ti6AL4V 32鈦. zakec333093. 50. 60. 50. 60. 五倍券; P幣. 銷售130 評價3093. 於 www.ruten.com.tw -
#7.Ti6Al4V Titanium Alloy End Milling with Minimum Quantity of ...
However, cutting fluids still promote the longer life of the cutting tool for many machining operations. This is the case of Ti6Al4V titanium milling operation ... 於 www.tandfonline.com -
#8.Ti6Al4V; titanium bar; screw rolling process - De Gruyter
The effects of both the microstructure and the original grain size on three-roll screw rolling process of Ti6Al4V titanium alloy bar were ... 於 www.degruyter.com -
#9.Properties of Grade 5 Titanium (Ti6Al4V or Ti 6-4) - Parts Badger
Grade 5 Titanium is one of the most popular alloys in the titanium industry and makes up almost half of the titanium used in the world. 於 parts-badger.com -
#10.鈦合金Ti-6Al-4V - 力Design&Collection
大家都知道鈦合金是個昂貴的材料,向來用這材料的東西都可以冠上"高級"兩個字而最近溜溜球界也宣起了一股鈦合金旋風到底甚麼是鈦合金呢? 於 leedesigncollection.blogspot.com -
#11.Titanium Grade Ti6al4v Plate - IndiaMART
Ragavendra Engineering - Offering Titanium Grade Ti6al4v Plate, टाइटेनियम प्लेट in Chennai, Tamil Nadu. Get best price and read about company. 於 www.indiamart.com -
#12.Ti6Al4V钛带Ti6Al4V耐高温钛合金带钛合金板品质保证 - BiliBili
Ti6Al4V 钛带Ti6Al4V耐高温钛合金带钛合金板品质保证 · 钛合金TC4材料的组成为Ti-6Al-4V,属于(α+β)型钛合金,具有良好的综合力学机械性能。比强度大。 · TC4 ... 於 www.bilibili.com -
#13.Cold Spraying Ti6Al4V - Impact Innovations GmbH
Ti6Al4V also known TC4, is an alpha-beta titanium alloy with excellent sprayability on Impact Cold Spray System 5/11. 於 impact-innovations.com -
#14.The preparation of titanium carbide thin film of Ti6Al4V at low ...
In this article, the technology of salt bath carburizing at low temperature (640 °C) is used to prepare the titanium carbide thin film on Ti6Al4V alloy ... 於 www.jvejournals.com -
#15.鈦合金Ti-6Al-4V
高強度與低比重。 High strength and low weight ratio. 2. 優異的抗腐蝕性與韌性。 Excellent corrosion resistance, and toughness. 3. 在溫度900°F(510 °C)具中等 ... 於 webbuilder5.asiannet.com -
#16.Key improvements in machining of Ti6al4v alloy: A review
Key improvements in machining of Ti6al4v alloy: A review. AIP Conference Proceedings 1859, 020048 (2017); https://doi.org/10.1063/1.4990201. 於 aip.scitation.org -
#17.Ti6Al4V钛合金表面真空渗氧处理
目的在Ti6Al4V钛合金表层制备硬度高、耐磨性好的硬化层。方法结合真空技术,以高纯的O2为介质,在Ti6Al4V钛合金表面制备致密的渗氧硬化层, ... 於 www.surface-techj.com -
#18.Relationships among the Microstructure, Mechanical ...
The microstructures of Ti6Al4V are complex and strongly affect its mechanical properties and fatigue behavior. This paper investigates the role of ... 於 www.hindawi.com -
#19.鈦合金棒Ti6Al4V, Gr.5 - 先端精材股份有限公司
鈦合金棒Ti6Al4V, Gr.5 · 料號:MT001 · 商品簡述. 規格: 棒徑(mm):, 2-150. 棒徑(inch):, 0.079-5.905 ... 於 www.appliedtitanium.com -
#20.Ti6Al4V合金激光原位合成自润滑复合涂层高温摩擦学性能
Abstract: In order to improve the high temperature tribological properties of Ti6Al4V alloy, multi-phase hybrid metal matrix high-temperature ... 於 html.rhhz.net -
#21.Ti6AL4V零件
首頁 · 關於我們 · 最新消息 · 產品介紹 · 訪客留言 · 聯絡我們 · 首頁. 產品分類Menu下拉. 生產設備_機械加工.CNC車銑複合機.CNC中心加工母機 · 生產設備_噴砂酸蝕 ... 於 www.qinchuang.com.tw -
#22.Drilling of CFRP/Ti6Al4V Stacks - 博客來
書名:Drilling of CFRP/Ti6Al4V Stacks,語言:英文,ISBN:9786139448593,頁數:236,作者:Prabukarthi, A.,Senthilkumar, M.,出版日期:2019/02/04, ... 於 www.books.com.tw -
#23.TITANIUM TI6Al4V ASTM GR 5 - ANNEALED
TITANIUM TI6Al4V ASTM GR 5 - ANNEALED. References for this datasheet. Some of the values displayed above may have been converted from their original units ... 於 www.tct.it -
#24.Ti-6Al-4V粉末
描述. 钛粉重量轻、强度高且具有耐腐蚀性,在当今众多要求最为严苛的市场中使用。我们的钛粉采用专有的氢化/脱氢法(HDH)工艺进行生产。HDH钛粉采用经过验证的生产工艺 ... 於 www.kymerainternational.com -
#25.Osseointegration of TI6Al4V dental implants modified by ...
In this work, the effect of the heat treatment on Ti6Al4V implants and topical administration of growth hormone to address a better ... 於 journalimplantdent.springeropen.com -
#26.鈦及鈦合金金屬射出成形 - 中瑞材料科技有限公司
應用:1.植入型醫療元件;2.飛機扣件;3.小型零件。 金屬射出成形: MIM: 鈦及鈦合金: Ti6Al4V: 醫療執行入型元件: Ti6Al7Nb: 近型生產: 陽極發 ... 於 zmtc.web66.com.tw -
#27.3D 打印Ti6Al4V 钛合金支架的力学性能及生物相容性
摘要:以3D 打印技术制备的多孔Ti6Al4V 钛合金支架为研究对象,研究其显微结构特征与力学性能的关系,. 利用骨髓间充质干细胞研究多孔钛合金支架的生物相容性,以及在 ... 於 www.ysxbcn.com -
#28.Ti6Al4V Titanium Alloy - Arcam - PDF Catalogs
Ti6Al4V Titanium Alloy General characteristics The high strength, low weight ratio and outstanding corrosion resistance inherent to titanium and its alloys ... 於 pdf.directindustry.com -
#29.Dynamic tribochemical behavior of TiN/TiCN coated Ti6Al4V ...
TiN/TiCN double coatings were deposited on Ti6Al4V alloy by arc ion plating to improve wear resistance of the titanium alloy in seawater. 於 xlink.rsc.org -
#30.64鈦鈦合金棒6.5mm × 27cm 航太級Ti6Al4V 實心圓 ... - 蝦皮購物
航太級鈦合金棒64鈦Ti6Al4V 鈦圓棒純鈦鈦條金屬加工材料正料不偷料不包含整直料件一端附進料倒角,長度均不含倒角因為切削進料倒角,所以略有machine mark, ... 於 shopee.tw -
#31.Ti-6Al-4V (TC4) Titanium Based Metal Powder for Additive ...
Product details: Ti-6Al-4V, also sometimes called TC4 or Ti64, is an alpha-beta titanium alloy with a high strength-to-weight ratio and excellent corrosion ... 於 www.msesupplies.com -
#32.Calcium phosphate coating on Ti6Al4V by autocatalytic route
Ti6Al4V (High-grade titanium aluminium vanadium alloy) substrates were subjected to several pretreatment steps, such as alkali and heat ... 於 www.icevirtuallibrary.com -
#33.Titanium, its alloys and 3D printing with Ti6Al4V - 3Dnatives
Titanium, specifically the Ti6Al4V alloy, is the most widely used alloy in additive manufacturing, due to its excellent properties. 於 www.3dnatives.com -
#34.Machinability of Titanium alloys (Ti6Al4V and Ti555.3)
3 alloy compared with Ti6Al4V alloy which can be machined at higher speeds up to 90 m min−1; (II) there was a correlation between the ... 於 hal.archives-ouvertes.fr -
#35.Titanium Ti-6Al-4V (Grade 5), Annealed - ASM Material Data ...
Ti-6Al-4V's poor shear strength makes it undesirable for bone screws or plates. It also has poor surface wear properties and tends to seize when in sliding ... 於 asm.matweb.com -
#37.OCP variation of Ti6Al4V alloy as a function of immersion time ...
The effect of fluoride ions concentration on the electrochemical behavior of Ti grade 2 and Ti6Al4V in citrate buffers was studied. 於 www.researchgate.net -
#38.材料科學與工程學系 - 國立交通大學
Ti-6Al-4V 亦被稱作Ti6Al4V 或Ti 6-4,為最廣用之鈦合金,其. 化學組成為6 wt%鋁、4 wt%釩、0.25 wt%鐵(最多) 、0.2 wt%氧(最多) 。 與商用級純鈦相比,Ti-6Al-4V 在 ... 於 ir.nctu.edu.tw -
#39.Mechanical Properties Ti6Al4V - RAMLAB WAAM Materials ...
Ti6Al4V is a alpha + beta titanium alloy. Its high strength-to-weight ratio makes it suitable for high-end applications such as aerospace and high-tech. 於 www.ramlab.com -
#40.鈦合金系列
Titanium Alloy. Product, Alloy, UNS, ASTM, AMS, Werkstoff, DIN, Others, Size(mm). Ingot, Gr.1, R50250, B348 / F67, Φ565mm(+/-10mm) Φ500mm(+/-10mm) 於 www.s-tech.com.tw -
#41.Ti-6Al-4V Titanium - AMS 4928 - UNS R56400 - Service Steel ...
Ti-6Al-4V Titanium is a 2-phase alpha-beta type Titanium alloy. It is a grade used primarily for wrought products, such as Round Bar, Flat Bar, Rolled Plate ... 於 www.ssa-corp.com -
#42.Development of Heat Treatments for Selective Laser Melting ...
To this purpose, the present article applies three different types of heat treatment on Ti6Al4V as-received samples produced by SLM: 1) ... 於 onlinelibrary.wiley.com -
#43.Production of Hydroxyapatite on the Surface of Ti6Al7Nb Alloy ...
Ti6Al4V is very commonly used for the production of dental implants. Titanium alloys whose mechanical and corrosion properties are equal or better than ... 於 www.intechopen.com -
#44.Ti6Al4V ELI Titanium Alloy - CBM - Wales
Pure titanium is not as strong as the different titanium alloys are. Ti6Al4V is the most widely used titanium alloy. It features good machin- ability and ... 於 www.cbmwales.co.uk -
#45.表面處理雷射積層熔融製造鈦合金之體內與體外生物相容性研究
表面處理 ; 奈米結構 ; 生物相容介面 ; 雷射積層熔融 ; 鈦六鋁四釩合金 ; surface modification ; nanostructure ; biocompatible interface ; SLM ; Ti6Al4V. 於 www.airitilibrary.com -
#46.氫化熱處理對Ti6Al4V 合金奈米晶粒細化研究 ... - YOKE
Creation of the nanostructures from the. βH treatment isbeneficial to enhance the mechanical properties in Ti6Al4V. Keywords: thermal hydrogenation processing, ... 於 www.yoke.net -
#47.Protein adsorption, cell viability and corrosion properties of ...
The hardness, wettability, and electrochemical properties of Ti6Al4V alloy surfaces treated with anodic oxidation and plasma oxidation as ... 於 link.springer.com -
#48.Rotary ultrasonic drilling of Ti6Al4V: Effects of machining ...
This article presents the use of the rotary ultrasonic machining process for drilling holes in Ti6Al4V alloy which is regarded as a ... 於 journals.sagepub.com -
#49.Titanium Ti6Al4V Grade-5 Alloy - Titan Engineering Pte Ltd
Grade 5, also known as Ti6Al4V, Ti-6Al-4V, Ti 6-4, Ti64 or R56400 is the most commonly used titanium alloy. It has a chemical composition of ... 於 www.titanium.com.sg -
#50.Fatigue Testing of Titanium Alloy Ti6Al4V Used in Medical ...
Because titanium alloy Ti6Al4V features low density, good corrosion resistance and biocompatibility, it a metal of choice for medicine, used in orthopedics, ... 於 www.scientific.net -
#51.Commercially pure titanium (cp-Ti) versus titanium alloy ...
Commercially pure titanium (cp-Ti) and titanium alloys (typically Ti6Al4V) display excellent corrosion resistance and biocompatibility. 於 pubmed.ncbi.nlm.nih.gov -
#52.Titanium TI-6AL-4V Properties and Common Uses
This workhorse alloy is the most commonly used metal in the aerospace, marine, power generation, and offshore industries (just to name a few). 於 titaniumprocessingcenter.com -
#53.Ti-6AL-4V Grade 5 Titanium in sheet, bar, and plate - United ...
Commonly referred to as Ti-6AL-4V (or Ti 6-4), this designation refers to its chemical composition of almost 90% titanium, 6% aluminum, 4% vanadium, 0.25% (max) ... 於 www.upmet.com -
#54.Ti-6Al-4V盤元與直棒產品開發
Ti-6Al-4V合金(Gr.5)之抗拉強度約900~1000MPa,密度約4.43g/cm 3 ,具有良好的抗腐蝕性,廣泛應用於石化、汽車、民生、生醫及航太等領域。 於 www.csc.com.tw -
#55.Ti6AL4V (grade 5) Titanium alloys processed with rapid ...
Ti6Al4V is the alloy used in motorsport and in aerospace and it is used by CRP Meccanica as well. It contains 6% of Aluminium and 4% of vanadium and it is an ... 於 www.crpmeccanica.com -
#56.Titanium alpha-beta alloy, Grade 5 (Ti-6Al-4V) - SubsTech
Titanium α-β alloy, Grade 5 (Ti-6Al-4V). Chemical composition: O=0.08% max., Al=6%, V=4%, Ti balance. Property, Value in metric unit ... 於 www.substech.com -
#57.Ti-6al-4v - an overview | ScienceDirect Topics
The titanium alloy Ti-6Al-4V is widely used in joint replacement because of its good mechanical properties. This versatile material offers high fatigue ... 於 www.sciencedirect.com -
#58.Characteristics of Ti6Al4V Powders Recycled from Turnings ...
Thus, powder metallurgy of Ti6Al4V alloy can be an alternative method either to use powder as the starting material or to recycle the new scrap ... 於 d-nb.info -
#59.Fatigue behaviour of Ti6Al4V alloy components manufactured ...
Fatigue behaviour of HIPed and stress relieved Ti6Al4V alloy specimen's produced by SLM was analysed (Rε = -1). 於 www.authorea.com -
#60.PCD刀具乾式車削Ti6Al4V的正交試驗研究 - 每日頭條
本試驗以研究工件的表面粗糙度WRa和車削刀具後刀面磨損量VB作為評價指標,選用自主設計加工的焊接式PCD車刀對Ti6Al4V鈦合金棒料進行乾式正交車削試驗, ... 於 kknews.cc -
#61.Titanium Alloy 6Al/4V Datasheet | Fine Tubes
ALLOY TI 6AL/4V • UNS 56400 • WNR 3.7165. Ti 6Al/4V is the most widely used of all the alpha-beta titanium alloys accounting for more than 50% of total titanium ... 於 www.finetubes.co.uk -
#62.Ti6Al4V - Heraeus
Ti6Al4V. Powder. Printing. Process. ENABLING YOUR ADDITIVE REVOLUTION. When it comes to additive manufacturing with metals, Heraeus. 於 www.heraeus.com -
#63.Powder titanium alloy - Ti6Al4V - Arcam AB - Ti-6Al-4V / grade ...
For over a decade, experienced users of Additive Manufacturing, MIM, HIP, and Coating technologies have trusted AP&C's Ti-6Al-4V powders to build ... 於 www.aeroexpo.online -
#64.Ti 6AL-4V - Premium Titanium Alloys Available Now From ...
Ti 6Al-4V (Grade 5) is the most widely used of all the alpha-beta titanium alloys.The alloy was originally developed for the aerospace market and widely used in ... 於 www.neonickel.com -
#65.Rapid coating of Ti6Al4V at room temperature with a calcium ...
Rapid coating of Ti6Al4V at room temperature with a calcium phosphate solution similar to 10× simulated body fluid - Volume 19 Issue 9. 於 www.cambridge.org -
#66.Ti-6Al-4v_百度百科
Ti-6Al-4V是钛合金牌号TC4的名义化学成分表示方法。 於 baike.baidu.com -
#67.Ti6Al4V钛合金渗碳层在HF中的腐蚀行为 - 材料研究学报
Corrosion Behavior of Carburized Ti6Al4V Ti-alloy in HF Solution. Li Kunmao 1, LIU Jing ,2, ZHANG Xiaoyan ... 於 www.cjmr.org -
#68.Titanium (Ti-6Al-4V) 3D Printing - Protolabs
Versus Ti grade 23 annealed, the mechanical properties of Ti6Al4V are comparable to wrought titanium for tensile strength, elongation, and hardness. Final parts ... 於 www.protolabs.com -
#69.Surface modification of Ti6Al4V alloy scaffolds manufactured ...
Surface modification of Ti6Al4V alloy scaffolds manufactured by electron beam melting. E Chudinova 1, M Surmeneva 1, A Koptyug 2, K Loza 3, O Prymak 3, ... 於 iopscience.iop.org -
#70.Corrosion behaviour of Ti6Al4V and duplex stainless steel ...
Corrosion behaviour of Ti6Al4V and duplex stainless steel (UNS31803) in synthetic bio‐fluids - Author: S. Sathiyanarayanan, C. Marikkannu, ... 於 www.emerald.com -
#71.Synthesis and Characterization of Ti6Al4V Alloy by Powder ...
Synthesis and Characterization of Ti6Al4V Alloy by Powder Metallurgy - written by S. Krishnamohan, S. Ramanathan published on 2013/11/23 download full ... 於 www.ijert.org -
#72.DIN-Ti 6Al 4V | 炬鋒特殊鋼股份有限公司
您現在查詢的鋼材資料為機械構造用碳鋼鈦與鈦合金鋼片、鋼板及鋼帶DIN-Ti 6Al 4V。炬鋒提供鋼材資料庫查詢服務,是台灣提供鋼材(鋼棒、鋼板、鋼管)供應及代客裁切、 ... 於 www.jfs-steel.com -
#73.Pearl®Micro Ti6Al4V ELI - Aubert&Duval Site - Aubert & Duval
Titanium powder produced by wire plasma atomization by Pyrogenisis: High purity; Excellent sphericity; Low oxygen content; Excellent flowability. Powder Size ( ... 於 www.aubertduval.com -
#74.Microstructural characterization of titanium alloy Ti6Al4V ...
The objective of this article was to analyze the effect of thermal oxidation on microstructural change and hardness properties of Ti6Al4V alloy. Titanium ... 於 www.scielo.org.co -
#75.Ti-6AI-4V Gr. 5 | Advanced Powders
For over a decade, experienced users of additive manufacturing, MIM, HIP, and coating technologies have trusted AP&C's Ti-6Al-4V powders to build ... 於 www.advancedpowders.com -
#76.ܑࢬNi ̈́Ni-Al ᔠᆸ၆Ti-6Al-4V Ъܛԩ উ̼̝ࡁտ
本研究主要探討商用鈦合金Ti-6Al-4V (Ti-64)在施以表面Ni 及Ni-Al 改質後,於700 ~. 900 °C 空氣條件下的高溫氧化行為。其中,表面改質可分別為單純電鍍Ni [Ti-64(Ni)] ... 於 www.anticorr.org.tw -
#77.How Can Aerospace Benefit from 3D Printed Titanium Ti6Al4V
Titanium Ti6Al4V is the workhorse alloy of the titanium industry, also known as Grade 5, TA6V or Ti64. This α-β titanium-based alloy is the most commonly ... 於 www.farinia.com -
#78.鈦-6鋁-4釩- 维基百科,自由的百科全书
^ Ti6Al4V Titanium Alloy (PDF). Arcam. ^ Ti64 Titanium Alloy Powder. Tekna. 於 zh.wikipedia.org -
#79.Comparative Study on 3D Printed Ti6Al4V Scaffolds with ...
Surface modification of Ti with bioactive elements has always been a research hotspot. In this study, to promote the osseointegration of Ti6Al4V ... 於 pubs.acs.org -
#80.Titanium Alloy <br>Ti6Al4V - 3T Additive Manufacturing
Titanium Alloy <br>Ti6Al4V. Description: Ti-6Al-4V is the most popular titanium alloy using up almost half of the total titanium production. 於 www.3t-am.com -
#81.Surface Texture-Based Surface Treatments on Ti6Al4V ...
Ti6Al4V which is the most frequently and successfully used titanium alloy has long been restricted in tribological-related operations due to the ... 於 www.x-mol.com -
#82.Titanium | Ti6Al4V | Metal 3D Printing at Materialise
Home · Manufacturing · Materials; Titanium (Ti6Al4V). Ti6Al4V, one of the widest-known alloys in Metal 3D Printing, combines excellent mechanical properties ... 於 www.materialise.com -
#83.鈦合金ti6al4v - 阿里巴巴商務搜索
阿里巴巴為您找到2131條鈦合金ti6al4v產品的詳細參數,實時報價,價格行情,優質批發/供應等信息。 於 tw.1688.com -
#84.Ti-6Al-4V(鈦-6鋁-4釩)的可持續銑削 - 建昌精密科技有限公司
切削區周圍產生強烈的熱熔劑是造成合金加工性差和加工持續性低的一個既定原因。本文的介紹試圖通過研究銑削方向、銑刀的螺旋角、切削速度以及低溫冷卻液和 ... 於 www.endmills-wotek.com -
#85.航太用鈦合金AMS4911 Ti-6Al-4V厚板開發 - 中國鑛冶工程學會
中鋼於成功開發工業用鈦厚板產品後,為進. 一步往高質化航太領域發展,選擇AMS4911 鈦. 合金厚板做為開發目標,然試製過程發生金相組. 織不合、機性伸長率偏低、鈦板 ... 於 www.cimme.org.tw -
#86.M2 Series 5 Ti6Al4V Grade 23
M2 Series 5 Ti6Al4V Grade 23. Base Parameters for Concept Laser M2 Series 5. Data in this material datasheet represents material built with 30 µm and 60 µm ... 於 www.ge.com -
#87.Numerical Modeling and Analysis of Ti6Al4V Alloy Chip for ...
Keywords: Ti6Al4V; Johnson-Cook; simulation of cutting processes; chip morphology. 1. Introduction. Ti and its alloys exhibit excellent ... 於 www.mdpi.com -
#88.Titanium Alloys - Ti6Al4V Grade 5 - Azom.com
Ti6Al4V is an alpha-beta alloy and the most widely used of all the titanium alloys. Ti6Al4V ELI is also briefly described. 於 www.azom.com -
#89.Data sheet: Ti6Al4V ELI-0406 powder for additive manufacturing
Data sheet: Ti6Al4V ELI-0406 powder for additive manufacturing (pdf). File size: 83 kB Language: English Part number: H-5800-1086. 於 resources.renishaw.com -
#90.Titanium Alloy: Ti-6Al-4V - Metals Piping
This page introduced titanium alloy Ti-6Al-4V covering its chemical composition, manufacture, mechanical properties, physical properties, microstructure, ... 於 www.metalspiping.com -
#91.Characterization of Titanium Alloy (Ti6Al4V) Obtained by ...
The development of additive manufacturing processes (3D printing), applied to metal alloys, is in line with the industry's current need for ... 於 www.sae.org -
#92.鈦等級5 / 6Al4V
鈦等級5 在環境溫度下具有良好的拉力性質,並且在高達300oC (570oF) 的溫度下具有實用的潛變抵抗性。對於疲勞和裂紋擴張具有極佳的抵抗性。如同大部分的鈦合金, ... 於 www.alloywire.tw -
#93.Microstructural evolution, its effect on Ti6Al4V alloy - Thermal ...
Typically, single phase pure titanium alloys are used for corrosion application, while engineered, dual phase α + β alloys such as Ti6Al4V-type ... 於 thermalprocessing.com -
#94.A 3D Printed Ti6Al4V Alloy Uniaxial Capacitive Accelerometer
In this work, the first uniaxial Ti6Al4V alloy accelerometer is designed, fabricated through the Laser Powder Bed Fusion (L-PBF) technique ... 於 ieeexplore.ieee.org -
#95.Titanium Alloy Grade 5 / Ti 6Al-4V - Aircraft Materials
Ti6Al4V is significantly stronger than other commercially pure titanium whilst still retaining the same stiffness and thermal properties (excluding thermal ... 於 www.aircraftmaterials.com -
#96.Ti6Al4V | Grade 5 Titanium - Smiths Metal Centres
Grade 5 Titanium (Ti 6Al 4V). Titanium Alloy. Grade 5 Titanium Alloy (Ti6Al4V). Ti-6Al-4V (Grade 5), classed as an alpha-beta alloy, is the most widely used ... 於 www.smithmetal.com -
#97.Time-dependent Enhanced Corrosion of Ti6Al4V in the ...
Dissolution of Ti6Al4V in the presence of albumin and H2O2 in physiological saline is also found to be dependent on potential: the titanium ... 於 www.nature.com